The Abbey of Aves
Moderators: DasPhule, Moderators
I had to Google to see what Aves is, never having heard of it before. Once I got to the manufacturer's page, I see that these cats make Apoxie Sculpt. Now that, I'm familiar with that and have some in the cabinet. I've never used it much, mainly for gaming scale figure bases and bits, but I've got friends who use it all the time as a filler. I've just always preferred CA for that.
Which Aves product is everyone referring to? It doesn't sound like Apoxie Sculpt. And what sets it aside from other putties and fillers?
Which Aves product is everyone referring to? It doesn't sound like Apoxie Sculpt. And what sets it aside from other putties and fillers?
I can't speak for anyone but myself, but I equate the fevered loyalty to Aves Apoxie Sculpt. Once I tried it, i tossed my squadron white in the "stuff I've outgrown" drawer along with my Testors plastic glue in the blue tube (YUCK).
I still have some conversion to go. For quick fills or very small projects I still use some french tube of "Plastic putty" that I got from my LHS. It doesn't work even close to as good as my Apoxie Sculpt, but it's sitting right there always ready.
BTW: My latest "find" for mixing Aves relates to an old hobby. I used to collect shot glasses... and using the heavy glass bar shot glasses makes mixing up a relatively small batch SUPER easy. Clean up is really easy on glass as well. And if for some reason it isn't, I've got 10 more just like it.
I still have some conversion to go. For quick fills or very small projects I still use some french tube of "Plastic putty" that I got from my LHS. It doesn't work even close to as good as my Apoxie Sculpt, but it's sitting right there always ready.
BTW: My latest "find" for mixing Aves relates to an old hobby. I used to collect shot glasses... and using the heavy glass bar shot glasses makes mixing up a relatively small batch SUPER easy. Clean up is really easy on glass as well. And if for some reason it isn't, I've got 10 more just like it.
- USS Atlantis
- Posts: 2388
- Joined: Sat Sep 08, 2007 6:44 pm
- Location: Galaxy 217, Orion Arm, Sol System, Sol III, 44° 53' N 93° 13' W (Local coordinate system)
- Contact:
1) Works easy with water - a little water and you can smooth it, shape it and it doesn't affect the drying/settingHarry Joy wrote:I had to Google to see what Aves is, never having heard of it before. Once I got to the manufacturer's page, I see that these cats make Apoxie Sculpt. Now that, I'm familiar with that and have some in the cabinet. I've never used it much, mainly for gaming scale figure bases and bits, but I've got friends who use it all the time as a filler. I've just always preferred CA for that.
Which Aves product is everyone referring to? It doesn't sound like Apoxie Sculpt. And what sets it aside from other putties and fillers?
2) 1:1 mix means never having a problem with ratios
3) Takes primer just like styrene
4) Once dry it files/sands easily
Myself - for creating features like filling large areas or even extending the linear accelerator on the 18" TOS-E it's Apoxie Sculpt
for small filling, like on my Lief Ericson then it's Apoxie Paste
Underlord wrote:I used to collect shot glasses... and using the heavy glass bar shot glasses makes mixing up a relatively small batch SUPER easy. Clean up is really easy on glass as well. And if for some reason it isn't, I've got 10 more just like it.
I've picked up many glass shot glasses for the same reason. I try to segregate them for particular uses, so some are used to hold Future, some rubbing alcohol, some [most actually] paint, and some for glues and such.
USS Atlantis wrote:Myself - for creating features like filling large areas or even extending the linear accelerator on the 18" TOS-E it's Apoxie Sculpt
for small filling, like on my Lief Ericson then it's Apoxie Paste
Thanks for the filling in, so to speak.
![Smile :)](./images/smilies/icon_smile.gif)
I'm having an issue, and I think it's a bad batch, but I shall seek opinions. I've got a set of Apoxie Paste that I mixed a batch of on Monday evening and the stuff still hasn't set fully. It's very tacky, and if I rub my fingers over it (applied to butterboard to fill some gouges) it will roll off, and I can even scratch it off completely with my fingernail. If it was just this once, I'd think I'd mixed it improperly, but every time I've tried using the paste it behaves like this. Like I said, I assume it's a bad batch. Any thoughts?
"Just slow it down. I'll shoot Hitler out the window."
-Professor Farnsworth
-Professor Farnsworth
- USS Atlantis
- Posts: 2388
- Joined: Sat Sep 08, 2007 6:44 pm
- Location: Galaxy 217, Orion Arm, Sol System, Sol III, 44° 53' N 93° 13' W (Local coordinate system)
- Contact:
As a regular user of the Paste, here's my thoughts
Sounds like one of several things
1) Improper mix - either the ratio or it wasn't completely mixed together - I usually mix the two parts for 2-3 minutes to make sure
2) Adulterated - something that could retard the drying got into one or the other parts
3) Bad batch - rare but it does happen
Is this a new pair of jars or some that you've had for a while?
Sounds like one of several things
1) Improper mix - either the ratio or it wasn't completely mixed together - I usually mix the two parts for 2-3 minutes to make sure
2) Adulterated - something that could retard the drying got into one or the other parts
3) Bad batch - rare but it does happen
Is this a new pair of jars or some that you've had for a while?
I just did another test mix and see how that goes. I mixed it at least 4 minutes, so we'll see if that goes. The ratio's are always 1:1.
This batch is a few years old, so that might be it, too. I'll see how this test comes out, but otherwise I'll just order some more from the store.
This batch is a few years old, so that might be it, too. I'll see how this test comes out, but otherwise I'll just order some more from the store.
"Just slow it down. I'll shoot Hitler out the window."
-Professor Farnsworth
-Professor Farnsworth
-
- Moderator
- Posts: 2463
- Joined: Sat Jul 13, 2002 4:42 pm
- Location: Back home in Cincy!
- Contact:
This year the had the Paste in tubes at WF. I bought both types.
"Tell me and I forget. Teach me and I remember. Involve me and I learn."
- Benjamin Franklin
"I am recalibrating my lack of faith in humanity. I start by reading opinions on message boards…"
- Dogbert
"What is his Comprehension level? Are we talking Human, Squirrel or Anvil?"
- Dilbert
- Benjamin Franklin
"I am recalibrating my lack of faith in humanity. I start by reading opinions on message boards…"
- Dogbert
"What is his Comprehension level? Are we talking Human, Squirrel or Anvil?"
- Dilbert
That might be the issue I'm having. My Part B has a bit of "oil" on the top of the container that I didn't mix in completely before mixing in part A.
The test batch from last night worked a lot better, but it's still just a bit tacky. I'm assuming it should dry to the same density as the Apoxy Sculpt, and that just isn't happening. I'll order a new batch (I like the idea of the new tubes) and give that a try.
The test batch from last night worked a lot better, but it's still just a bit tacky. I'm assuming it should dry to the same density as the Apoxy Sculpt, and that just isn't happening. I'll order a new batch (I like the idea of the new tubes) and give that a try.
"Just slow it down. I'll shoot Hitler out the window."
-Professor Farnsworth
-Professor Farnsworth
- Glorfindel
- Posts: 1544
- Joined: Sat May 02, 2009 7:00 pm
- Location: Long Island, NY
I can't recall if this was covered in this thread but does anyone know the difference between Apoxie Paste and Fixit Paste?
http://www.avesstudio.com/index.php?pag ... t&Itemid=4
http://www.avesstudio.com/index.php?pag ... t&Itemid=4
Reading their descriptions it's as if their both the same product. Has anyone used these as seam fillers because it seems as if they would work great. I'm curious. And if so do you prefer one over the other? Would you recommend it? I have the Apoxy Sculpt already and was wondering if these other two products are easier to use on seams.
http://www.avesstudio.com/index.php?pag ... t&Itemid=4
http://www.avesstudio.com/index.php?pag ... t&Itemid=4
Reading their descriptions it's as if their both the same product. Has anyone used these as seam fillers because it seems as if they would work great. I'm curious. And if so do you prefer one over the other? Would you recommend it? I have the Apoxy Sculpt already and was wondering if these other two products are easier to use on seams.
Buck Laughlin: [after Beatrice the dog jumps up on the show judge] He went for her like she's made outta ham.
~Best in Show, 2000
~Best in Show, 2000
- USS Atlantis
- Posts: 2388
- Joined: Sat Sep 08, 2007 6:44 pm
- Location: Galaxy 217, Orion Arm, Sol System, Sol III, 44° 53' N 93° 13' W (Local coordinate system)
- Contact:
- Glorfindel
- Posts: 1544
- Joined: Sat May 02, 2009 7:00 pm
- Location: Long Island, NY
I worked a little tonight on the pilot of the Pro Shop X-wing group build I'm involved in and tried something that popped into my head at work today. Perhaps I'm a bit slow but I read on the Aves site that their Safety Solvent for their pastes and 2-part epoxies (sculpt) can feather out these products, and that it is safer than acetone. So being the recluse that I am I packed the open back of the pilot with my Aves and then dipped a paint brush into some acetone and slowly began feathering out the seams between the plastic and the Aves. It worked great and was thoroughly satisfied. My question is this, before I attempt it, can Epoxy Sculpt be thinned to the point of it becoming a paste-like substance? Will or can it still dry rock hard? Opinions? ![Think :-k](./images/smilies/eusa_think.gif)
![Think :-k](./images/smilies/eusa_think.gif)
Buck Laughlin: [after Beatrice the dog jumps up on the show judge] He went for her like she's made outta ham.
~Best in Show, 2000
~Best in Show, 2000
- TER-OR
- Site Admin
- Posts: 10531
- Joined: Thu Jul 11, 2002 7:05 pm
- Location: Conjugate imprecision of time negates absolute determination of location.
- Contact:
I have thinned the sculpt with alcohol to the point where I could brush or syringe it into a gap. It was not as strong as full-strength epoxy putty or moderately thinned. I'd experiment with that if I were you.
Raised by wolves, tamed by nuns, padded for your protection.
Terry Miesle
Never trust anyone who says they don't have a hobby.
Quando Omni Flunkus Moratati
Terry Miesle
Never trust anyone who says they don't have a hobby.
Quando Omni Flunkus Moratati
- sci-fi-bldr
- Posts: 1530
- Joined: Tue Oct 18, 2005 5:13 pm
- Location: Louisville-KY
- Contact:
- Mr. Badwrench
- Posts: 9587
- Joined: Fri Jul 12, 2002 6:31 pm
- Location: Wheatridge, Co.
-
- Posts: 2636
- Joined: Sun Jul 14, 2002 10:14 am
Well, I'm sold. I've always modeled on the principal of "making the inexpensive build LOOK expensive", i.e rattlecan instead of airbrush, etc, but I finally broke down and bought some Aves (It's not that expensive, just never bothered). Wow. I've been working on a few prototype Trek kitbashes that required a generous amount of filling and reshaping. On the first, I used Squadron. Fill, shape, sand, fill, shape, sand, fill, shape etc etc. On my second one (same design), I was able to fill, shape, and smooth with finger the same area and shape in just a few minutes with better results than I achieved on the 1st prototype with about 5 man-hours of filling, shaping and sanding. Looks like 24 hours to dry, a quick light sanding for a mirror finish, and I'm ready for primer WAY ahead of schedule. Sweet!
- Lt. Z0mBe
- Posts: 7311
- Joined: Thu May 29, 2003 1:46 pm
- Location: Balltown Kentucky, by God!
- Contact:
Welcome to the Church of Aves, Brother Jess.its-jess wrote:Well, I'm sold. I've always modeled on the principal of "making the inexpensive build LOOK expensive", i.e rattlecan instead of airbrush, etc, but I finally broke down and bought some Aves (It's not that expensive, just never bothered). Wow. I've been working on a few prototype Trek kitbashes that required a generous amount of filling and reshaping. On the first, I used Squadron. Fill, shape, sand, fill, shape, sand, fill, shape etc etc. On my second one (same design), I was able to fill, shape, and smooth with finger the same area and shape in just a few minutes with better results than I achieved on the 1st prototype with about 5 man-hours of filling, shaping and sanding. Looks like 24 hours to dry, a quick light sanding for a mirror finish, and I'm ready for primer WAY ahead of schedule. Sweet!
![Pray [-o<](./images/smilies/pray.gif)
Kenny
- Glorfindel
- Posts: 1544
- Joined: Sat May 02, 2009 7:00 pm
- Location: Long Island, NY
Picked up the Epoxy Paste recently and I have to say I like the slow self leveling action it takes on as it soothes itself out. Very neat stuff indeed.
On an unrelated Aves subject....unlike the Aves will Bondo Spot Putty crack over time like other putty's?
On an unrelated Aves subject....unlike the Aves will Bondo Spot Putty crack over time like other putty's?
Buck Laughlin: [after Beatrice the dog jumps up on the show judge] He went for her like she's made outta ham.
~Best in Show, 2000
~Best in Show, 2000
Texture.
I haven't used the clay yet, though I am keen to. The paste is what you would have if you thinned the sculpt down significantly. When the paste does eventually cure it is also softer will still take an impression, such as a fingernail. The sculpt sands beautifully, very much like styrene and resin, and can be polished to a glass-like finish.
From what I have best been able to gather, the clay is closer to traditional ceramic sculpting media. Not quite Chavant, maybe WED or stoneware.
Hope that helped a little.
I haven't used the clay yet, though I am keen to. The paste is what you would have if you thinned the sculpt down significantly. When the paste does eventually cure it is also softer will still take an impression, such as a fingernail. The sculpt sands beautifully, very much like styrene and resin, and can be polished to a glass-like finish.
From what I have best been able to gather, the clay is closer to traditional ceramic sculpting media. Not quite Chavant, maybe WED or stoneware.
Hope that helped a little.
Re: The Abbey of Aves
Some help with a crisis of faith and too impatient to scroll through 11 pages:
I've got 2 resin fuselage halves that will have to hold up a total wingspan of 8-10 inches of resin wings. CA or Aves? If Aves, sandpaper rough surface or dinged with a Dremel?
I've got 2 resin fuselage halves that will have to hold up a total wingspan of 8-10 inches of resin wings. CA or Aves? If Aves, sandpaper rough surface or dinged with a Dremel?
Re: The Abbey of Aves
Glue the resin with CA or 5 minute epoxy.
I would not trust Aves for glueing two halves on its own. Its great stuff for filling gaps and sculpting.
The Aves goes on smoothly with a drop of water and just using your finger. You don't need special tools for sanding once its dry, all you need is the same sanding techniques you would use on styrene and resin.
I use CA and accelerator to fill gaps a lot as well but Aves scribes way better for me when I need to.
I would not trust Aves for glueing two halves on its own. Its great stuff for filling gaps and sculpting.
The Aves goes on smoothly with a drop of water and just using your finger. You don't need special tools for sanding once its dry, all you need is the same sanding techniques you would use on styrene and resin.
I use CA and accelerator to fill gaps a lot as well but Aves scribes way better for me when I need to.
Re: The Abbey of Aves
Thanks. Yes, I've done crazy stuff with Aves, sculpted completely missing detail on a spaceship, etc. but never relied on it as a load-bearing adhesive.
Re: The Abbey of Aves
So now I have a package of J-B Weld Plastic Bonder ("World's Strongest Bond") Sets in 15 minutes. I'd appreciate any tips for removing anything that oozes out of the seam or has to be sanded. Is there a solvent that wipes it away cleanly without harming the kit resin? Other advice?