Primer as a basecoat

This is the place to get answers about painting, weathering and other aspects of finishing a model.

Moderators: DasPhule, Moderators

Post Reply
ulvdemon
Posts: 527
Joined: Thu Sep 09, 2010 9:10 am
Location: Alpharetta, GA

Primer as a basecoat

Post by ulvdemon »

Has anyone used the primer for the build as basecoat? Current working on a USS Gato and I am tempted to keep the black primer I used as the basecoat for part of the finish. Also, I noticed that Vallejo's paint set has the Light gray listed as primer also. Just wanted to see what others have done.
Current build: 1/32 Hasegawa F6F-5 Hellcat

Completed: 1/48 Hasegawa F-16CM<,1/48 Revell Mig-21PFM, 1/48 Revell/Monogram AH-64A, Revell/Monogram 1/48 F-14D, AMT 1/420 USS Defiant, AMT 1/650(?) USS Enterprise, 1/72 Bandai VF-1J, AMT 1/537 USS Reliant, Academy 1/35 M1-A1 Abrams, Academy 1/48 F-86F30, Linbergh's USS Gato
User avatar
southwestforests
Posts: 3323
Joined: Sun Oct 24, 2010 3:09 pm
Location: Right smack in middle of Missouri

Re: Primer as a basecoat

Post by southwestforests »

ulvdemon wrote: Thu Apr 22, 2021 10:07 amHas anyone used the primer for the build as basecoat?
That's pretty much my standard practice, be it spacecraft, trains, tanks, boats, buildings, wargame minis, model rocketry.
"There are a thousand things that can happen when you go light a rocket engine, and only one of them is good."
Tom Mueller of SpaceX, in Air and Space, Jan. 2011
ulvdemon
Posts: 527
Joined: Thu Sep 09, 2010 9:10 am
Location: Alpharetta, GA

Re: Primer as a basecoat

Post by ulvdemon »

Figured it was a silly question but had to ask. Making the hull of the sub black and figured no sense in driving myself crazy if the primer is also black to go with that also.
Current build: 1/32 Hasegawa F6F-5 Hellcat

Completed: 1/48 Hasegawa F-16CM<,1/48 Revell Mig-21PFM, 1/48 Revell/Monogram AH-64A, Revell/Monogram 1/48 F-14D, AMT 1/420 USS Defiant, AMT 1/650(?) USS Enterprise, 1/72 Bandai VF-1J, AMT 1/537 USS Reliant, Academy 1/35 M1-A1 Abrams, Academy 1/48 F-86F30, Linbergh's USS Gato
User avatar
southwestforests
Posts: 3323
Joined: Sun Oct 24, 2010 3:09 pm
Location: Right smack in middle of Missouri

Re: Primer as a basecoat

Post by southwestforests »

Reading this again a few hours later I'm now not sure I meant what I thought I meant.
Eh, never mind, I don't feel good today and my brain is muddy.
"There are a thousand things that can happen when you go light a rocket engine, and only one of them is good."
Tom Mueller of SpaceX, in Air and Space, Jan. 2011
irishtrek
Posts: 5719
Joined: Fri Sep 16, 2005 2:04 am
Location: wouldn't you like to know

Re: Primer as a basecoat

Post by irishtrek »

I've been using grey primer for space craft, hell even used it for a PT boat model.
Normal?? What is normal??
ulvdemon
Posts: 527
Joined: Thu Sep 09, 2010 9:10 am
Location: Alpharetta, GA

Re: Primer as a basecoat

Post by ulvdemon »

Good to go then. Going to use the black primer for the black on a USS Gato for the black part of the hull. no need to make it too complicated. The model was complicated enough.
Current build: 1/32 Hasegawa F6F-5 Hellcat

Completed: 1/48 Hasegawa F-16CM<,1/48 Revell Mig-21PFM, 1/48 Revell/Monogram AH-64A, Revell/Monogram 1/48 F-14D, AMT 1/420 USS Defiant, AMT 1/650(?) USS Enterprise, 1/72 Bandai VF-1J, AMT 1/537 USS Reliant, Academy 1/35 M1-A1 Abrams, Academy 1/48 F-86F30, Linbergh's USS Gato
EVApodman
Posts: 4540
Joined: Sat Sep 30, 2006 8:37 am

Re: Primer as a basecoat

Post by EVApodman »

I have used Tamiya white lacquer primer for my Proteus sub and gray for my K'ting warship. In both cases I wanted a base that hopefully wouldn't lift up with masking. I felt that a lacquer primer would "bite" into the plastic better that enamel or acrylic.

Normally I am wary of rattle can paint but both of the them went on satin smooth after repeated light coats. Tamiya puts out a quality product.
"Nothing to do now but drink a beer and watch the universe die."
"Basically what I do everyday."

I AM Spartacus!
I'm Batman.

Don't believe everything you see on the Internet!- Abraham Lincoln

Oh my God!! It's full of plastic peanuts!

Today is a good day to model!
seam-filler
Posts: 3894
Joined: Thu Apr 17, 2003 11:05 am
Location: Aberdeen, Scotland

Re: Primer as a basecoat

Post by seam-filler »

I've used primers as base-coats several times. If the colour is right then it doesn't matter a hill of beans as to what the original intended use of the paint may be. As a matter of fact, I've found that Halford's white primer is pretty close to the "Ford Diamond White" used on may Gerry Anderson vehicles.

Most black primers (especially Halford's and Games Workshop Chaos black primer) are very, very close to to the back paint used for modern Royal Navy submarines.
"I'd just like to say that building large smooth-skinned models should be avoided at all costs. I now see why people want to stick kit-parts all over their designs as it covers up a lot of problems." - David Sisson
User avatar
blakeh1
Posts: 3783
Joined: Mon Jan 24, 2011 1:48 pm
Location: Warminster, Pennsylvania

Re: Primer as a basecoat

Post by blakeh1 »

If it is a color I need I will not hesitate to use primer as a base coat

Saves me a step
A mind is like a parachute. It doesn't work if it is not open.
- Frank Zappa
ulvdemon
Posts: 527
Joined: Thu Sep 09, 2010 9:10 am
Location: Alpharetta, GA

Re: Primer as a basecoat

Post by ulvdemon »

Guess I am such a stickler for the process I am using that using the primer for the color is still a stretch. :-k
Current build: 1/32 Hasegawa F6F-5 Hellcat

Completed: 1/48 Hasegawa F-16CM<,1/48 Revell Mig-21PFM, 1/48 Revell/Monogram AH-64A, Revell/Monogram 1/48 F-14D, AMT 1/420 USS Defiant, AMT 1/650(?) USS Enterprise, 1/72 Bandai VF-1J, AMT 1/537 USS Reliant, Academy 1/35 M1-A1 Abrams, Academy 1/48 F-86F30, Linbergh's USS Gato
Post Reply